Cross Die Head

Cross die head designed for the production of an additional smooth layer — a third layer around the corrugated pipe, or pipe outside-pipe production. Enables tri-layer pipe manufacturing for enhanced performance and specialty applications.

Produces an additional smooth outer layer — a third layer around the corrugated pipe, or full pipe-outside-pipe construction — on the same extrusion line.
Enables single-wall smooth pipe production within the same line, without reconfiguring the upstream extruders.
Compatible with HDPE and PP melt drawn from the line's existing extruders.
Crosshead flow path distributes melt evenly around the full circumference for consistent outer-layer wall thickness.
Mounts inline on the die-head bracket for fast changeover to smooth-layer production.

Uzmanlarımız 24 saat içinde sizinle iletişime geçecek

Hatta Göre Teknik Özellikler

Farklı üretim hatları ve boru çaplarında Cross Die Head varyantları

Hat	Konfigürasyon	Boru Çapı
SL300	SL300 die başı	ID100–OD315
SL600	SL600 die başı	ID100–OD630

Bileşen Teknik Özellikleri mi gerekiyor?

Cross Die Head için detaylı özellikler, fiyatlandırma ve konfigürasyon seçenekleri için bizimle iletişime geçin.

WhatsApp: +86 187 6563 9190 amywang@pipe-corrugator.com

Teklif İste

Üretim Hatlarında Kullanılır

Bu bileşen aşağıdaki Suba Machinery üretim hattı konfigürasyonlarının parçasıdır

SL300ID100–OD315

SL300 Oluklu Boru Ekstrüzyon Hattı

SL300 hattı, yatay yapı, su soğutma ve ekstrüzyon teknolojisi ile yüksek hızlı üretim için ID90mm–ID300mm HDPE/PP çift cidarlı oluklu boru üretir.

6 özelliklerDetayları İncele

SL600ID100–OD630

SL600 Oluklu Boru Ekstrüzyon Hattı

SL600 hattı, yatay yapı, su soğutma ve ekstrüzyon teknolojisi ile yüksek hızlı üretim için ID90mm–ID600mm HDPE/PP çift cidarlı oluklu boru üretir.

6 özelliklerDetayları İncele

Tümünü İncele

Ekipman

oluklu boru üretim hattınız için temel bileşenler. Bireysel yükseltmeler, yedeklemeler ve özel konfigürasyonlar mevcuttur.

Extruder

Suba machinery corrugated pipe extrusion line includes automatic feeding system and hopper with drying function. The developed SJ65, SJ75, SJ90, SJ120, SJ150 extruders use a buffering mixing section and large L/D ratio screws, which has a good plasticization, high output and wide adaptability to raw materials; the feeding section with a spiral buffer design, direct water cooling and automatic temperature control system, which can increase the conveying efficiency at the feeding end. Bimetallic screw and barrel effectively improve the wear resistance and corrosion resistance, service life is increased by 2-3 times; Extruder is equipped with a fine-tuning base to make sure a better connection with the die head; Gearbox adopts vertical structure which achieves compact structure, low noise index, strong carrying capacity and high transmission efficiency; The optimized co-extrusion system of multiple extruders achieves optimal matching production of various specifications. The production of small sized products does not cause waste of the extrusion system, and the production of large sized products has sufficient output.

2 featuresDetayları İncele

Double Layer Die Head

The blank is extruded from the extruder through the inner and outer die of the double layer pipe die head. Double layer pipe die head is suitable for HDPE and PP materials. Die head is fixed on the die head bracket, and die head replacement is simple and quick. Suba die head short channel design (shorten about 25%), effectively lower down the melt pressure, achieves low temperature low pressure extrusion, production efficiency increases 25%; The low extrusion melt pressure reduces requirement of parts, the material leakage risk at the connection is greatly reduced. The double channel starts from the die head body and reaches the die exit, it achieves multi extruders extrude two layers. The optimized design of double layer pipe die head, the inner and outer wall thickness adjustment is very stable and convenient, which achieves dynamic adjustment, no need to stop extruders, no need to loosen any fastening screws, shorten adjustment time and reduce the material leakage risk.

2 featuresDetayları İncele

Corrugator

The innovative corrugator of Suba machinery corrugated pipe extrusion line adopts a horizontal water cooling structure. The vacuum and inflation technology work together to ensure the rapid pipe forming. The center height of different sizes is consistent; Changing sizes only need to replace moulds, no need to adjust the corrugator platform. Patented closed loop water cooling system; Moulds replacement only by loosening or tightening the screws and turning the eccentric disk, there is no any water tubes connected to the moulds, moulds replacement no need to plug and unplug the water tube, 50% time saving for sizes replacement. Corrugator left and right racks are electrically opened and closed freely, which is convenient for equipment inspection and maintenance, and the equipment structure is more stable and easier to operate. Patented mould cooling system, one end of the hose runs continuously and synchronously with the moulds, the other end rotates around the fixed axis. The optimized mould cooling system ensures that the inertia impact of the equipment is minimized, which is especially suitable for high speed production and ensures a longer service life. The length of the moulds cooling water inlet and outlet tube is no longer limited by the specification of moulds, the inlet and outlet tubes are arranged more closely, which avoid equipment damage and the water leakage risk caused by tubes stuck between adjacent moulds.

3 featuresDetayları İncele

Tümünü İncele

Üretime Başlamaya Hazır mısınız?

Ücretsiz danışma ve teklif için bize ulaşın

Ücretsiz teknik danışma

Mühendisler 24/7 hazır

24 saat içinde yanıt